1. No Need for Pre-Press or Pre-Ironing: Eliminating moisture is not required. Prepressing is optional if desired.

2. Positioning Your Design: Take the time to align your transfer at the desired location on your item. Typically, flat heat presses do not necessitate the use of heat-resistant tape to secure the design. However, it is strongly recommended for hat transfers or when using an iron. You'll develop a sense of when it's necessary.

3. Pressing: Apply medium pressure to your transfer at 330°F / 160°C for 20 seconds. The transfer won't be harmed by increased heat, pressure, or time within reasonable limits. However, excessive heat can damage your garment, so conduct a test first and use parchment paper or a protective guard sheet to shield your garment from direct contact with the iron.

4. Immediate Peeling: Our transfers are designed for hot peeling. If the image doesn't release from the film, consider adjusting your time or temperature slightly. Pressing multiple times won't damage the transfer

5. Final Press & Washing Instructions: Place parchment paper or a single layer of T-shirt material over the design and press again for 15 seconds to soften the design, enhance durability, and eliminate shine. For a glossy finish, cover with a protective guard sheet during the final press. When washing, turn the shirt inside out, wash in cold water, and dry using low heat or hang.